DIGITAL TUNER
CD PLAYER
7
English
1.
Tune to your desired station, following steps
1-4
under
‘
RADIO RECEPTION
’.
™
If the frequency is already stored in the memory, the
preset number will be displayed.
2.
Press
PROG
to activate programming.
™
PROGRAM
flashes in the display.
3.
Press the
PRESET
4
,
3
(down/up) to allocate a preset
station number from 1 to 29.
4.
Press
PROG
again to confirm the setting.
5.
Repeat steps
1-4
to store all other presets.
• You can clear a preset number by storing another frequency
in its place.
To deactivate programming mode
If during programming you decide not to programme a station,
adjust the
OFF
/ TAPE, TUNER, CD
slider to CD or
OFF
/TAPE.
Tuning to preset stations
Press the
PRESET
4
,
3
control (down, up) until the desired
number is shown.
–
: CD door open
–
Total track number and playing time: in stop mode
–
no d1SC
: when no disc inserted/ error in CD operation or
with the CD (see Troubleshooting)
–
Current track number and elapsed playing time: during CD
playback.
–
Elapsed playing time freezes and flashes: in PAUSE position.
–
SHUFFLE/REPEAT (ALL)
modes: when the respective mode
is activated
–
PROGRAM
:
programme mode active
–
:
appears briefly and the selected track number (1 -20)
when you programme
–
FULL
:
programme memory full
–
:
when you cancel a CD programme
–
:
you press
PROG
but no track has been selected
CD DISPLAY INDICATION
PROGRAMMING RADIO STATIONS
STEREO
FM
TUNER
CD
CD
PROGRAM
CD
CD
PROGRAM
REPEAT ALL
SHUFFLE
PROGR
PRESET
PROG
BAND
CD MODE