POWER SUPPLY
9
Recharging works only on players supplied with the rechargeable ECO-PLUS NiMH
battery AY 3362.
Recharging the ECO-PLUS NiMH battery on board
1
Insert the rechargeable ECO-PLUS NiMH battery AY 3362.
2
Connect the mains adapter to the 4.5V DC socket of
the player and then to the wall socket.
y
A
is shown and
ChArGE
is displayed for 5
seconds.
• Recharging stops after a maximum of 7 hours, or when you start playback.
3
When the battery is fully recharged,
and
FULL
appear briefly in the display, before the
display switches off.
Notes: – It is normal for the batteries to become warm during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes and
Hot
is displayed.
– To ensure proper recharging on board, take care that contacts are clean.
– Use only the ECO-PLUS NiMH battery AY 3362.
Handling instructions
• Recharging already charged or half-charged batteries will shorten their lifetime.
We therefore recommend that you let the rechargeable ECO-PLUS NiMH battery
run till it is completely empty before you recharge it.
• To avoid a short circuit, do not let the battery touch any metal object.
• If the battery becomes empty soon after recharging, then either its contacts are
dirty or it has reached the end of its lifetime.
ECO-PLUS NiMH battery information
(for versions supplied with
the rechargeable ECO-PLUS NiMH battery AY 3362)
English
Ultra perf/01 eng 22/11/00 9:41 Page 9
