Philips AWP3753, User Manual

Page: 8 / 28

5
- The system and installation shall comply with applicable and local regulations.
- The containment or other substances removal rate of this water purifier is not
applicable to all water sources.
- For best performance, please change your filter cartridge based on the filter
replacement period suggested in chapter 2. When significant low flow rate is
observed, we recommend to change the filter.
- Do not block the filtered water outlet or connect other devices to it.
- Keep the device away from heat to avoid distortion or breakage.
- Do not tamper with the device.
- This appliance does not soften water.
- Do not use filtered water in aquariums. Tap water, filtered or unfiltered, can be harmful
to fish.
- If an instruction is given from the authorities that mains water must be boiled, then
the filtered water by this device must also be boiled. When the instruction to boil
water is no longer in force, the entire device must be thoroughly cleaned, and filter
replaced. For some groups of people (e.g. those with impaired immunity and babies),
it is recommended that tap water should be boiled, which also applies to the filtered
water by this device.
Caution
If you need information or if you have any questions, please visit the Philips website at
www.philips.com or contact the consumer care center in your country. If there is no
consumer care center in your country, go to the local dealer.
4. Guarantee & Service
- The water temperature for the filtration mode should be between 5-38°C. If the inlet
water temperature exceeds 38°C, the filter will be damaged. If the inlet water
temperature is lower than 5°C, it may cause freezing and water leakage.
- Do not reverse the installation order.
- This device is intended for domestic use only.