24
EN
9 Appendix 1:
Mount the
device onto wall
Caution
•
Risk of product damage! Always consult professional
personnel to safely mount the product onto wall.
Warning
•
Risk of injury! Make sure that no supply ducts such as gas,
water or electricity are harmed when you drill the holes.
The AW5000 has a ¼" - 20 UNC (depth: 0.35")
mounting hole at the back of the device.
Through this hole, you can easily mount the
device onto wall with a suitable mounting
bracket. The mounting bracket is not included
and you need to purchase one. Please follow
the instructions included with your purchased
wall mounting bracket.
Note
•
The wall mounting bracket described below is for
reference only.
•
Make sure that the mounting screw of your purchased
wall mounting bracket matches the size of the hole at
the back of AW5000, that is, ¼ inch (6.75mm).
•
Make sure that the wall mounting bracket supports at
least 25 lbs (11.3 kg).
0.35’’
1/4’’ -20UNC
1
Find a suitable place on a wall and use a
pencil to mark the chosen location with
your purchased bracket.
2
Follow the instructions supplied with the
purchased bracket to drill holes as marked.
3
Insert the mounting screw on the bracket
into the hole at the back of AW5000, then
turn the rotating handle to tighten the
screw.
Summary of Contents for AW5000
Page 2: ......
