5 min.
1. Fill a household pot
with enough water to
cover all parts and place
all parts in the pot. Let
the water boil for 5
minutes. Make sure the
parts do not touch the
side of the pan.
2. Allow the water to cool
down.
3. Gently remove the
parts from the water.
Place the parts on a
clean surface/tea towel
or drying rack to air-dry.
4. Store the dry items in a
clean, dry and covered
container.
Using the breast pump
Cushion size
The Philips Avent single/double electric breast Premium pump has a soft, active cushion. It gently
compresses your nipple to stimulate milk flow. The cushion is made of flexible silicone, that adapts to
up to 99.98
% of women, fitting nipple sizes up to 30
mm.
Charging the breast pump
Fully charge the battery before you use the breast pump for the first time and when the battery is low.
Fully charging the battery takes up to 4
hours.
1. Switch off the device. 2. Insert the adapter into
the wall socket and insert
the small plug at the
other end into the motor
unit.
3. The battery is charging.4. When the battery is
fully charged, remove the
adapter from the wall
socket and pull the small
plug out of the motor
unit.
13
English
English