Wash and sanitize all parts before use. See section titled
‘Cleaning the Manual Breast Pump’ on page 15.
16
1
Wash your hands thoroughly. Insert the white
valve into the pump body so that it fits securely into
the small round hole. Make sure the pointed side of
the valve is facing down.
2
3
Twist the milk container onto the pump body
until securely in place.To ensure that the
pump is completely stable, you can use the
stand with the 4 oz/125 ml milk container
.
4
Fit the Let-down Massage Cushion onto the pump
funnel. Secure the rim of the Let-down Massage
Cushion around the funnel, so that there are no
gaps.
(This is easier if assembled while the Let-down
Massage Cushion is wet.)
5
Place the forked end of the handle under the
rounded tip of the diaphragm stem. Push down
gently on the handle until it clicks into place.
6
Click the pump cover onto the pump body.
Fit the silicone diaphragm with stem into the pump
body. Ensure a perfect seal around the rim by
pressing down with your fingers.
(This is easier if
assembled while the diaphragm is wet.)
White stand
Assembling the Manual Breast Pump
White valve
Pump body
Milk container (4 oz/125 ml)
Stand (same as )
Let-down Massage Cushion
Funnel cover (same as )
Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
15
Clear pump cover
Silicone diaphragm with a stem
Forked handle
You may want to use the Manual Breast Pump when you need a cord-free alternative to the
Electronic Breast Pump. While the Manual Breast Pump uses many of the same parts as the Electronic
Breast Pump, please note the parts shaded in green are specific to the Manual Breast Pump.
Parts specific to the Manual
Breast Pump are included
in a separate bag:
Cleaning the Manual Breast Pump
Caution: Do not use antibacterial or abrasive cleaners/detergents. To clean the valve, rub gently
between your fingers in warm soapy water – do not insert objects as this may cause damage.
Every time before use (including first use):
Disassemble and clean all parts of the Manual Breast Pump on the top rack of the
dishwasher, or in warm soapy water and rinse. All parts of the Manual Breast Pump
are sterilizer safe. Sanitize Manual in a Philips AVENT Steam Sterilizer (electronic
or microwave), or by boiling in water for 5 minutes.
Manual Pump
c
d
e
f
f
g
h
h
u
v
w
u
v
w
c
d
e
f
g
h
Manual Breast Pump – Parts Guide
