Philips Avance Collection HR2353/09, User Manual

Page: 28 / 144

28 English
The kneading process does not start and E1 displays on the screen.
• There are more than 500g of flour in the mixing chamber.
Make sure that you do not put more than 500g of flour in the mixing chamber for one
batch.
After the flour is poured in the mixing chamber, the weight shown on
the display screen changes a bit after the lid is closed.
• After the appliance is plugged in, the chamber lid is removed when the weighing
system is still calibrating.
Strictly follow step 2, 3 and 4 on page 17.
The kneading process does not start and E2 displays on the screen.
• There are less than 200g of flour in the mixing chamber.
Make sure that you do not put less than 200g of flour in the mixing chamber for one
batch.
The mixing paddle is running idle, and there is no pasta coming out.
• The ratio of the flour and water is incorrect.
Disconnect the plug from the power source and discard dough. Clean the pasta maker,
re-measure ingredients correctly and follow the user manual instructions again to restart
the pasta making.
Unable to make pasta successfuly with the liquid calculation function.
• The required liquid amount indicated on the display screen does not apply to some
recipes (for example cookies, gluten free pasta).
These recipes require you to skip the liquid calculation part. In this case, press the start/
pause button for 3 seconds, and the appliance will start kneading and extruding directly.