V. Usage instruction
1. Before the first-time use
a. Wipe all the joints and connections with tissue to check if there is leakage.
If the tissue stays dry, it means the system is installed properly.
b. Turn on the faucet to allow water to run for 10 minutes to flush the air and
carbon fines through the filters. After that, the system is ready and you can start
to consume the filtered water.
2. User interface
When the faucet is turned on, all the indicators will light up to show the filter
lifetime and the battery lifetime.
When the system is in standby mode, all the indicators will be off. You may press
the reset button and the indicators will light up to show the filter lifetime and the
battery lifetime.
a. Filter lifetime indicator
Status
More than 7 days
Constant blue light
N/A
There will be beeps whenever
the faucet is turned on,
reminding you to replace the filter.
Flashing blue light
Less than 7 days or
has reached the end of life
Indicator
Sound alert
9
CBPA filter lifetime indicator
1
1
UF filter lifetime indicator
2
2
CB filter lifetime indicator
3
3
Battery lifetime indicator
5
5
Reset button
4
4