Philips AT798, User Manual

Page: 13 / 38

Clean the trimmer (see chapter ‘Cleaning and
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol or
acetone to clean the shaver and the charging stand.
Always unplug the shaver before you clean it under
For the best cleaning results, we advise you to use
water is not too hot, to prevent your hands from
of the shaver when you rinse it. This is normal and not
Cleaning the shaving unit under the tap
1 Switch off the shaver.
2 Press the release button to open the shaving
unit.
3 Rinse the shaving unit and hair chamber under
a hot tap for 30 seconds.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
- Rinse the hair chamber and the inside of the
shaving unit.
- Rinse the outside of the shaving unit.
4 Close the shaving unit and shake off excess
water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
Never dry the shaving unit and the hair chamber
with a towel or tissue, as this may damage the
shaving unit.
5 Open the shaving unit again and leave it open
to let the shaver dry completely.
ENGLISH
13
4222_002_5681_3_DFU-Luxury_A5_v2.indd 13 27/03/2018 12:21