Philips AS 130, User Manual

Page: 7 / 22

5 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the docking speaker.
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located on the bottom of the docking
speaker.
Connect the AC power adapter between
the DC IN socket at the back of the
docking speaker, and
the power supply.
Turn on
Press POWER to turn on the docking speaker.
»
blinks on the display panel.
To switch the docking speaker to
standby mode, press POWER again.
Switch to standby mode automatically
The docking speaker automatically switches to
standby mode when
no audio input cable is connected to the
AUDIO IN socket, and
the Bluetooth connection is invalid for 15
minutes.
Set time
1
Press and hold BRIGHTNESS / SET TIME
for two seconds.
»
[24H] or [12H] begins to blink.
2
Press - VOL/TIME or VOL/TIME + to
select [24H] or [12H] for 24 or 12 hour
format.
3
Press BRIGHTNESS / SET TIME "
»
The hour and minute digits begin to
blink.
4
Press - VOL/TIME or VOL/TIME +
repeatedly to set the hour.
5
Press BRIGHTNESS / SET TIME "
»
Minute digits begin to blink.
6
Press - VOL/TIME or VOL/TIME +
repeatedly to set the minute.
7
Press BRIGHTNESS / SET TIME "
»
The set time is displayed.
ON Standby
POWER