6
Put the shaving heads back into the shaving
unit.
Note: Make sure that the projections of the shaving
heads fit exactly into the recesses.
7
Put the retaining frame back into the shaving
unit (A) and turn the lock clockwise (B).
8
Insert the lug of the shaving unit into the slot
in the top of the shaver. Then close the shaving
unit.
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
Cleaning the trimmer with the cleaning
brush
Clean the trimmer every time you have used it.
1
Switch off the shaver and disconnect it from
the mains.
2
Push the trimmer slide downwards to open
the trimmer.
3
Clean the trimmer with the short-bristled side
of the cleaning brush. Brush up and down along
the trimmer teeth.
4
Close the trimmer (‘ click’).
English
28
B
A
AT928_EN_A6_CS3.indd 28
13.5.21 1:53:24 PM