7
EN
Set time
1
Rotate the
Third Knob
to "
SET TIME
" to
activate clock setting mode.
»
Hour and minute digits blinks.
2
Rotate the
First Knob
to adjust the hour.
3
Rotate the
Second Knob
to adjust the
minute.
4
Press
OK
on the
First Knob
to confirm.
»
The setting time is displayed.
5
Rotate the
Third Knob
to
CLOCK
after
setting.
»
The hour and minute digits stops
blinking.
Turn on
The clock radio turns on automatically once
your plugged in.
4 Play from
Bluetooth
device
Note
•
The effective operation range between the Bluetooth
speaker and the paired device is approximately 10
meters (30 feet).
•
Keep this Bluetooth speaker away from other electronic
devices that may cause interference.
•
Make sure that the
Third Knob
switches to
CLOCK
before setting.
1
Press
SOURCE
repeatedly to select
Bluetooth source.
»
on the display panel flashes.
2
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3
Select
“AJT600”
displayed on your device
for pairing.
»
If connection is successful, the
Bluetooth speaker beeps twice and
steadily on.
4
Start music play on your Bluetooth device.
»
If Bluetooth disconnected, the music
will pause. Press
on the Bluetooth
device to start play again.
Bluetooth reset
In Bluetooth mode, press
OK
on the first
knob for over 5 seconds to erase all pairing
informations.
»
"
BT RESET
" displayes on the panel.
•
The Bluetooth speaker enters
Bluetooth mode automatically after
erase completed.
