6
EN
In DAB+ mode, press and hold
SCAN
for 3
seconds.
»
The clock radio stores all the available
DAB+ radio stations automatically.
»
After full scan, the first available station is
broadcast.
Store DAB+ radio stations
manually
You can store up to 10 DAB+ radio stations.
1
Tune to a DAB+ radio station.
2
Press and hold
PRESET
for 3 seconds to
activate the storing mode.
3
Press
TUNING
/ to select a number.
»
The preset number is displayed for
one second. Then if this position is
occupied, the previously stored DAB+
station name will be displayed; if this
position is empty,
[Empty]
will be
displayed.
4
Press
PRESET
to confirm.
5
Repeat steps 1-4 to store other DAB+
stations.
Note
•
To remove a pre-stored DAB+ radio station, store
another station in its place.
Listen to a preset DAB+
radio station
In DAB+ mode, press
PRESET
repeatedly to
select a preset radio station.
Use DAB+ menu
1
In DAB+ mode, press and hold
MENU
for
3 seconds to access DAB+ menu.
2
Press
TUNING
/ to scroll through the
menu options:
•
[STATION]
: Display a list of available
DAB+ stations.
•
[FULL SCAN]
: Scan and store all
available DAB+ radio stations.
•
[MANUAL]
: Tune to a specific channel/
frequency manually and add it to the
station list.
•
[DRC]
(Dynamic Range Control)
:
Add
or remove a degree of compensation
for differences in the dynamic range
among DAB+ stations. You may
experiment the options on different
source materials to decide which
option suits best.
•
[PRUNE]
: Remove invalid stations from
the station list.
•
[SYSTEM]
: Adjust system settings (see
the Chapter "
Use system menu
").
3
To select an option, press
SELECT
.
4
Repeat steps 2-3 if sub-option is available
under one option.
[DRC]
•
[DRC OFF]
: No compensation applied.
•
[DRC HIGH]
: Maximum compensation
applied (the default option recommended
for noisy environment).
•
[DRC LOW]
: Medium compensation
applied.
[PRUNE]
•
[PRUNE N]
: Return to the previous menu.
•
[PRUNE Y]
: Remove invalid stations from
the station list.
