6
EN
2
Replace a new lithium
CR2025 battery with correct polarity
(+/-) as indicated.
3
Close the battery compartment to
the original position, and tighten the
screw with a screwdriver.
Turn on
Press
to turn the system on.
Switch to standby mode
Press
repeatedly to switch
the unit to standby mode.
»
The time (if set) appears on the
display.
Adjust volume level
Press
to increase/decrease
the volume level.
Adjust display
brightness
Press
repeatedly to select different levels of
display brightness.
View the information
Press
repeatedly.
»
The current status and the
clock time, date are displayed
consequently.
Set the Clock
1
In standby mode, press and hold
for 1 second or more.
»
The hour digits blink on the
display.
2
Press
to set the
hour.
3
Press
to store the setting
and the minute digits begin to blink.
4
Repeat the above steps 2-3 to set
the 12/24 hour format, minute, day,
month and year.
Note
•
If no button is pressed in 60 seconds, the
unit exits clock setting mode automatically.
•
To exit clock setting mode without storing,
press
.
