13
English
EN
Stop alarm ring
• When the alarm rings, press the
corresponding
AL1
or
AL2
.
»
The alarm stops but the alarm settings
remain.
Tip
•
If you press and hold /
SOURCE
, the alarm will also
be stopped, and the unit will switch to standby mode.
•
If you do not stop the alarm, it will ring for 30 minutes.
•
When an alarm rings, it begins from a relative low
volume, and rises gradually to the highest alarm volume
you set previously in 90 seconds.
Set the sleep timer
This unit can switch to standby mode
automatically after a set period of time.
• Press
SLEEP
repeatedly to select from 120,
90, 60, 45, 30 and 15 minutes.
»
When the sleep timer is activated, is
shown on the screen.
To deactivate sleep timer
• Press
SLEEP
repeatedly until [OFF] (off) is
shown.
»
The sleep timer is deactivated,
disappears from the screen.
Adjust display brightness
• When no alarm is ringing, press
SNOOZE
/
BRIGHTNESS
repeatedly to
select different levels of display brightness.
Note
•
When using batteries to operate, you can not select
brightness levels.
Summary of Contents for AJ7400
Page 2: ......