15
EN
6 Other features
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring
at different time.
Note
•
Make sure that you have set the clock correctly.
1
Press and hold
AL1
/
AL2
for two seconds
to activate alarm setting mode.
»
The hour digits and alarm icon begin
to blink.
2
Press
/-
or / to set the
hour.
3
Press
AL1
/
AL2
to confirm.
»
The minute digits begin to blink.
4
Repeat steps 2 to 3 to set the minute and
alarm volume.
Select alarm source
Adjust
AL1/2 iPhone·RADIO·BUZZ
control to
select alarm source for both alarms.
Note
•
When alarm time comes, the selected radio, buzzer, or
iPod/iPhone turns on.
•
You can only select the same alarm source for Alarm
1/ Alarm2.
•
If iPhone is selected as alarm source, while no iPhone/
iPod is connected, the clock radio switches to buzzer
source instead.
Activate/deactivate alarm timer
1
Press
AL1
/
AL2
to view alarm settings.
2
Press
AL1
/
AL2
again to activate or
deactivate the alarm timer.
»
or is displayed if alarm timer is
on and disappears if it is off.
To stop the ringing alarm:
Press the corresponding
AL1
/
AL2
.
»
The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press
SNOOZE
.
»
The alarm snoozes and repeats ringing
9 minutes later.
To adjust alarm interval (in minutes), press
SNOOZE
repeatedly.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press
SLEEP
repeatedly to select the sleep
timer period (in minutes).
»
When the sleep timer is activated,
appears.
To deactivate the sleep timer, press
SLEEP
repeatedly until
[OFF]
(off) appears.
15 30 60 90 120
OFF
