To improve reception:
For
FM
, extend and position the pigtail fully to obtain optimum reception.
For
AM
, the set is provided with a built-in aerial. Direct the aerial by adjusting
the position of your clock radio.
STORING AND USING PRESET STATIONS
You can store up to a total of 10 radio stations in the memory, 5 on each
waveband.
1
Tune to your desired station (see TUNING TO RADIO STATIONS).
2
To store a preset, hold down briefly on a PRESET button 1-5 until you hear a
double beep.
™
Display shows the preset number of your station.
3
Repeat steps 1 and 2 to store your other stations.
• You can overwrite a preset station by storing another frequency in its place.
4
Press a.
PRESET
button 1-5 to listen to a preset station.
USING THE ALARM
GENERAL
Two different alarm times can be set. This can be useful when you need to
be woken up at a different time e.g. during the week and at the weekend:
• ALARM 1 - radio mode
• ALARM 2 - buzzer mode. The gentle wake buzzer alarm increases its beep
tone frequency within seconds.
SETTING THE ALARM TIME AND MODE (See
5
)
1.
Check the radio is switched off.
2.
Press
AL 1
or
AL2
to on.
™
Display:
ON
appears under the respective
AL
or
AL
icon.
3.
Press and hold
SET ALARM 1
or
SET ALARM 2
until alarm time
digits flash.
4.
Hold down or press
HOUR
+
or
repeatedly to set and
adjust the hours and minutes respectively. Release
HOUR
+
or
when you have reached the correct setting.
5.
After both the hours and minutes are set, press
SET ALARM 1
or
SET
