Philips AJ301DB, User Manual

Page: 7 / 16

BASIC OPERATION
.
Switching on the system
• Press POWER .
™
The system will switch to the last selected source.
• Press TUNER/AUX or DOCK .
™
The system will switch to the selected source.
Switching the system to standby mode
• In any source mode, press POWER .
Switching off the volume temporarily
Press MUTE on the remote control to stop sound play-back instantly.
™
Playback will continue without sound and the display shows MUTE .
• To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Illumination brightness
Press REPEAT ALARM /
BRIGHTNESS CONTROL
once or more.
• The brightness of the display can be adjusted:
High � Low � Off � High .
SETTING THE CLOCK AND DATE
1. In any mode, press and hold TIME SET until clock digits flashes.
2. Press
2;
to select 12 Hours/ 24 Hours mode.
3.
Hold down or press
¡1
/
2™
repeatedly to set and adjust the hours.
4. Press TIME SET to confirm.
™
The clock digits for the minutes flash.
5.
Repeat the
steps 3 - 4
until you complete all the other settings for minutes,
year, month and days.
8
VOL+/-
–
adjusts the sound level
9
MUTE
–
switches playback sound off and on.
0
Display
–
shows clock/alarm times and status of the set
!
Dock connector (30 pins)
–
connects iPod player
@
ALM 2
–
activates/confirm ALARM 2 time setting
–
displays ALARM 2 time
–
switches off ALARM 2 time
#
REPEAT ALARM /
BRIGHTNESS CONTROL
–
switches off the alarm for a 9 minute period
–
changes the brightness of the display illumination
$
POWER jack
–
socket for AC/DC 9V adapter
%
Pigtail
–
improves FM reception
^
ALM 1
–
activates/confirm ALARM 1 time setting
–
displays ALARM 1 time
–
switches off ALARM 1 time
&
TIME SET
–
activates/confirm clock time/date setting
*
(Wake-up mode) DOCK
•
BUZZER
•
TUNER
–
selects alarm mode: dock, buzzer or radio
(
AUX IN jack (3.5 mm)
–
connects to external audio source
)
RESET
–
clears clock time setting
POWER SUPPLY
Mains adapter
1 Connect the mains adapter to the set's DC 9V socket and to the power socket.
Helpful hints: To avoid damage to the set, use only the adapter supplied!
The type plate is located on the bottom of the set.