background image

3

English

EN

This product is fitted with an approved molded 

plug. If you replace the fuse, use one with:
•  the ratings shown on the plug,
•  a BS 1362 approval, and
• 

the ASTA approval mark.

Contact your dealer if you are not sure about 

what type of fuse to use.

Caution: To conform with the EMC directive 

(2004/108/EC), do not detach the plug from 

the power cord.

Notice

Any changes or modifications made to this 

device that are not expressly approved by 

Philips Consumer Lifestyle may void the user’s 

authority to operate the equipment.

 

This product complies with the radio 

interference requirements of the European 

Community.
This product is in compliance with the essential 

requirements and other relevant provisions of 

Directive 1999/5/EC.
A copy of the EC Declaration of Conformity 

(DoC) is available in the packaging.

 

Your product is designed and manufactured 

with high quality materials and components, 

which can be recycled and reused. 

 

When this crossed-out wheeled bin symbol is 

attached to a product it means that the product 

is covered by the European Directive 2002/96/

EC.

Please inform yourself about the local separate 

collection system for electrical and electronic 

products.
Please act according to your local rules and 

do not dispose of your old products with your 

normal household waste. Correct disposal of 

your old product helps to prevent potential 

negative consequences for the environment and 

human health.

  

Your product contains batteries covered by 

the European Directive 2006/66/EC, which 

cannot be disposed with normal household 

waste.Please inform yourself about the local 

rules on separate collection of batteries 

because correct disposal helps to prevent 

negative consequences for the environmental 

and human health.

Information about the use of batteries:

Caution

 

Risk of leakage: Only use the specified type of batteries. 

Do not mix new and used batteries. Do not mix 

different brands of batteries. Observe correct polarity. 

Remove batteries from products that are not in use for 

a longer period of time. Store batteries in a dry place.

 

Risk of injury: Wear gloves when handling leaking 

batteries. Keep batteries out of reach of children and 

pets.

 

Risk of explosion: Do not short circuit batteries. Do 

not expose batteries to excessive heat. Do not throw 

batteries into the fire. Do not damage or disassemble 

batteries. Do not recharge non-rechargeable batteries.

Environmental information

All unnecessary packaging has been omitted. 

We have tried to make the packaging easy to 

separate into three materials: cardboard (box), 

polystyrene foam (buffer) and polyethylene 

(bags, protective foam sheet.) 

Your system consists of materials which can 

be recycled and reused if disassembled by 

a specialized company. Please observe the 

local regulations regarding the disposal of 

Summary of Contents for AEA7000



















Reviews: