Basic operation
1
Connect the supplied switching adapter to
the wall outlet and the DC jack on the set
or insert batteries as described in
Power
Supply
.
•
Turn the source selector to
TUNER
to
select tuner mode.
•
Turn the source selector to
AUX
to select
AUX mode.
➜
The indicator light is lit in the previous
two modes.
•
Turn the source selector to
OFF
to switch
off the set.
➜
The indicator light is off.
2
To adjust volume, turn
/–
.
Switching on radio
1
Turn the source selector to
TUNER
.
2
Turn FM/MW selector to
FM
or
MW
to
select FM or MW waveband.
Manual tuning
By using this feature, it is possible to manually
tune to a specific channel frequency. In addi-
tion to antenna orienting for better radio
reception, the optimum reception can also be
obtained by using this feature.
1
In FM/MW mode, turn
TUNING wheel
to
tune to stations.
Helpful hints:
–
For FM waveband, a white point over the
tuning wheel indicates the current FM fre-
quency.
–
For MW, a white point below the tuning
wheel indicates the current MW frequency.
AUX IN
You can listen to the sound of the connect-
ed external device through your AE2730.
1
Turn source selector to
AUX
to select AUX
mode.
2
To avoid noise distortion, turn down the vol-
ume on your external device.
3
To adjust the sound and volume, use the
sound controls on your external device and
AE2730.
Basic Operation
Radio/AUX
AE2730_12_A_CCR 2008.6.24 10:00 Page 6
Summary of Contents for AE2730
Page 2: ...1 0 8 9 2 3 5 4 6 7 1 2 ...
