15
EN
Clean the pre-filter
Filter alert light status Follow this
lights up.
Clean the pre-filter
Note
•
Filter light
lights up approximately once
every two weeks.
1
Rinse the pre-filters under a running
tap. If the pre-filters are very dirty, use
a vacuum cleaner or soft brush to
remove the dust before rinsing under
a running tap.
Note
•
Make sure to rinse the pre-filters
equipped in both sides of the
appliance.
2
Air dry the pre-filters.
Note
•
Make sure that the pre-filter is
completely dry before you put it back
in the appliance. If it is still wet, bacteria
may multiply in it and shorten the
lifetime of the pre-filter.
3
After the pre-filters are properly put
back in the appliance, reset the filter
lifetime counter. (Refer to chapter 7
"Resetting the filter lifetime counter".)
