Philips AC3252, User Manual

Page: 21 / 24

21
EN
E
ngl
ish
Problem Possible solution
The color of the
air quality light
always stays the
same.
The air quality sensor is dirty. Clean the air quality
sensor (see chapter "Cleaning").
The appliance
produces a
strange smell.
The first few times you use the appliance, it may
produce a plastic smell. This is normal. However, if the
appliance produces a burnt smell, contact your Philips
dealer or an authorized Philips service centre. The
appliance may also produce an unpleasant smell when
the filter is dirty. In this case, clean or replace the filter
concerned.
The appliance is
extra loud.
If the appliance is too loud, you can change the fan
speed to a lower fan speed level. When using the
appliance in a bedroom at night, choose the sleep
mode.
The appliance
still indicates
that I need to
replace a filter,
but I already did.
Perhaps you did not reset the filter lifetime counter.
Plug in the appliance, touch to switch on the
appliance, and touch and hold the reset button
for
3 seconds.
Error code "Er"
displays on the
screeen.
The hall sensor is not working properly. Remove and
then reattach the front panel. If the error code "Er"
still exists, contact the Consumer Care Center in your
country.
Error codes "E1",
"E2", "E3" or
"E4" displays on
the screeen.
The appliance has malfunctions. Contact the
Consumer Care Center in your country.