10
EN
6 Replacing the
filter
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the air purification filter is in
optimal condition when the appliance
is operating. When the filters are almost
expired, the filter code displays on the
screen to indicate that you need to
replace the filters.
If the filters are not replaced in 14 days,
the appliance will stop operating and
get locked.
Replacing the filter
(fig.
y
)
Note
•
The air purification filter is not washable
nor vacuum cleanable.
•
Switch off the appliance before
replacing the filter.
Filter alert light
status
Follow this
A3 displays on the
screen
Replace the
NanoProtect Pro
S2 (
FY2428
)
1
Pull the bottom part of the front
panel to remove it from the
appliance (fig.
d
).
2
Press the two clips down and pull
the pre-filter towards you (fig.
e
).
3
Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust
(fig.
w
).
4
Air dry the pre-filter.
Note
•
Make sure that the pre-filter is
completely dry. If it is still wet, bacteria
may multiply in it and shorten the
lifetime of the pre-filter.
•
Cleanse your hands after changing the
filter.
5
Put the pre-filter back into the
appliance (fig.
g
).
Note
•
Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6
To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.
h
).
7
Touch and hold the reset button
for 3 seconds to reset the pre-filter
cleaning time (fig.
x
).
