Filter reset
You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch
and
simultaneously
for 3 seconds to enter the filter reset
mode (fig.
{
).
»
Code (
A3
) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch and hold
for 3 seconds to
force reset the filter lifetime counter
of the NanoProtect filter Series 3
(fig.
z
).
3
Code
(C7)
of the Nanoprotect filter
AC displays on the screen after the
lifetime counter of the NanoProtect
filter Series 3 has been reset (fig.
|
).
4
Touch and hold
for 3 seconds to
force reset the filter lifetime counter
of the NanoProtect filter AC and exit
the filter reset mode (fig.
}
).
12
EN
7 Storage
1
Turn off the air purifier and unplug
from the wall outlet.
2
Clean the air purifier, air quality
sensor and pre-filter (see chapter
‘Cleaning’).
3
Let all parts dry thoroughly before
storing.
4
Wrap the filter and pre-filter
separately in air tight plastic bags.
5
Store the air purifier, the filter and
pre-filter in a cool, dry location.
6
Always thoroughly wash hands
after handling filters.
