ENGLISH
19
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
6
Replace the set back into the Razor Head
Assembly so that the ‘wings’ on the comb
fit within the brackets located towards the
center of the Assembly.
The set will only fit into the Razor Head Assembly
if the ‘wings’ are between the brackets. Make sure
that the two pointy edges of the head fit exactly
into the recesses.
7
Repeat the process for the other two sets
of cutters and combs.
8
Replace the frame.
C
9
Press down (1) and turn wheel clockwise
(2) until it locks into place.
10
Close the Razor Head Assembly.
8140XL_8150XL.qxd 2/23/05 4:56 PM Page 19 (Zwart plate)
