ENGLISH
14
ENGLISH
15
14
C
3
Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4
Close trimmer by pressing trimmer down.
5
Turn razor OFF.
Cleaning
◗
Regular cleaning guarantees better shaving
results.
◗
Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗
Never clean, remove or replace head assembly
while motor is on.
◗
Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗
Do not use razor if combs are damaged or
broken. Facial injury may occur.
Cleaning: Razor Heads
The easiest and most hygienic way to clean the
razor heads is to rinse them after each use or at
least once a week with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗
Regular cleaning guarantees better shaving
results.
◗
Do not immerse razor in water.
C
◗
While rinsing razor heads, water may drip out of
the base of razor.This is a normal occurence.
1
Always turn razor OFF, unplug from outlet
and remove cord from razor before
cleaning.
C
2
Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3
Clean inside razor heads and hair chamber
by running under hot water.
C
4
Clean outside of Razor Head Assembly by
running under hot water.
5
Close the Razor Head Assembly and shake
off excess water.
C
6
Open Razor Head assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
