Philips 7603 series, Service Manual

Page: 51 / 257

AFA
Read only bit, for monitoring purpose only.
AFB
Read only bit, for monitoring purpose only.
White Tone
In the WHITE TONE sub menu, the values of the black cut off level can be adjusted. Normally, no alignment is needed for
the WHITE TONE. You can use the given default values.
The color temperature mode (NORMAL, COOL and WARM) and the color (R, G, and B) can be selected with the UP/DOWN
RIGHT/LEFT cursor keys. The value can be changed with the LEFT/RIGHT cursor keys. First, select the values for the
NORMAL color temperature. Then select the values for the COOL and WARM mode. After alignment, switch the set to
standby, in order to store the alignments.
Default settings:
1. NORMAL (color temperature = 10500 K):
−
NORMAL R = 40
−
NORMAL G = 40
−
NORMAL B = 40
2. COOL (color temperature = 14000 K):
−
DELTA COOL R = -2
−
DELTA COOL G = 0
−
DELTA COOL B = 6
3. WARM (color temperature = 8200 K):
−
DELTA WARM R = 2
−
DELTA WARM G = 0
−
DELTA WARM B = -7