Philips 65OLED804/56, Service Manual

Page: 28 / 119

5.2.4 How to Clear the Error Buffer
The error code buffer is cleared in the following cases:
• By using the CLEAR command in the SAM menu
• By using the CLEAR command in the Factory mode:
• By using the following key sequence on the remote control transmitter: “ 062599 ” directly followed by the OK button.
• If the contents of the error buffer have not changed for 50 hours, the error buffer resets automatically.
Note: If you exit SAM by disconnecting the mains from the television set, the error buffer is not reset.
5.3 Set Option Code
Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value
of the panel type: see column “Set Option Code” in below tab. After resetting the Display Code, restart the set immediately.
CTN_ALT BOM# Panel Type
Panel ID
55PUH7374/96 TPT550J1-QUBH84.K SD9P0AH 21
55PUT7374/56 TPT550J1-QUBH84.K SD9P0S 29
55PUT7374/67 TPT550J1-QUBH84.K SD9P0S 29
55PUT7374/68 TPT550J1-QUBH84.K SD9P0S 29
55PUT7374/79 TPT550J1-QUBH84.K SD9P0AH 21
55PUT7374/98 TPT550J1-QUBH84.K SD9P0S 29
65PUH7374/96 TPT650J1-QUBF90.K S9WP1J 29
65PUT7374/56 TPT650J1-QUBF90.K SDWP0B 29
65PUT7374/67 TPT650J1-QUBF90.K SDWP0B 29
65PUT7374/67 TPT650J1-QUBF90.K SDWP0B 29
65PUT7374/68 TPT650J1-QUBF90.K SDWP0B 29
65PUT7374/68 TPT650J1-QUBF90.K SDWP0B 29
65PUT7374/79 TPT650J1-QUBF90.K S9WP1J 29
65PUT7374/98 TPT650J1-QUBF90.K SDWP0B 29
70PUH7374/96 TPT700B5-U1T01.D S01AB 8
70PUT7374/79 TPT700B5-U1T01.D S01AB 8
70PUT7374/98 TPT700B5-U1T01.D S01L 8
75PUT7354/56 TPT750UA-QUBF90.K S9WPD 59
55OLED804/56 LE550AQD-EMA7 2
55OLED804/67 LE550AQD-EMA7 2
55OLED804/71 LE550AQD-EMA7 2
55OLED804/79 LE550AQD-EMA7 2
55OLED804/98 LE550AQD-EMA7 2
65OLED804/56 LE650AQD-EMA7 3
65OLED804/67 LE650AQD-EMA7 3
65OLED804/71 LE650AQD-EMA7 3
65OLED804/79 LE650AQD-EMA7 3
65OLED804/98 LE650AQD-EMA7 3