SpeechMike Classic Barcode Installation and User Manual
5
8. On the following screen, the only option selected should be
Specify
a
location
, and
the path of the Windows\inf subfolder should be displayed in the field. If necessary,
uncheck all other options and click
Next
.
9. Windows will now start looking for the necessary files; click
Next
.
Note
: The required files from the Windows 98 SE CD can be found in the
Setup/Win98 subdirectory, browse to this directory and click
OK
.
10. After the first part of the installation has been completed successfully, click
Finish
.
11. Repeat steps 6–10 until all four SpeechMike Classic Barcode components are
installed correctly .
Software installation
Note
: A user must have administrator rights to install the program under Windows 2000
or Windows XP. Contact your system administrator if you need help.
Windows ME, Windows 2000 and Windows XP:
The SpeechMike Classic Barcode software is delivered on a CD. When you insert the
SpeechMike CD into your CD-ROM drive, autorun.exe is started. Select
Install
to begin
the installation. If this program is not run when you insert the SpeechMike CD, start
setup manually by doing the following:
1. Double-click the
My
Computer
icon on the desktop.
2. Double-click the CD-ROM drive icon; you will be shown the contents of the CD.
3. Start the program autorun.exe by double-clicking it and select
Install
.
Windows 98 SE
:
The software has already been installed as part of the hardware installation described
above.
