Unplug and plug back in the mains supply to put the base in registration mode and start the
following procedure immediately after that.
Handset
5
Handset
Registration
The additional handset will get full capability when it is registered to the base station (see p. 1).
You can register up to 6 handsets to the DECT 521 or DECT 525 base station.
Press to enter the carousel menu.
Enter the 4-digit RC code written on the sticker placed under the base and press
.
To register a handset
To unregister a handset
Press to enter the carousel menu.
Scroll to
Handset
and press
to select.
Note
: should you have your handset serviced alone, please make sure it is unregistered from the
base station before taking it back to the repair centre.
Enter the 4-digit RC code and press
.
Scroll to
Un-register handset
and press
to select.
Scroll to
Registration
and press
to select.
Choose the handset to un-register from the list and press
.
This feature allows you to monitor the babys room. Place the handset in the room to be
monitored and you will hear the noise coming from the room on the additional handset.
Babysit mode
Press to enter the carousel menu.
Scroll to
Handset
and press
to select.
To activate/deactivate the babysit mode
if there are at least 2 handsets
Press to select
Babysit mode
.
Select
ON
or scroll to
OFF
and press
to confirm.
Note
: an intercom is necessary to monitor the room (see page 8).
Scroll to
Handset
and press
to select.
Scroll to
Registration
and press
to select.
Press to select
Register handset
.
DECT5250_UK_2_V03_30.12.04.qxd 30.12.2004 16:05 Seite 5
