background image

17

COLOR TELEVISION

90 Days Free Labor

One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)

This product can be repaired in-home.

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to receive warranty service.  A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product.  

For 90 days

thereafter,

all parts will be repaired or replaced free, and labor is free.

From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges.  From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.

All parts, including repaired and replaced parts, are covered only for
the original warranty period.  When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires. 

WHAT IS EXCLUDED?

Your warranty does not cover:

labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.

product repair and/or part replacement because of  misuse,
accident, unauthorized repair or other cause not within the control
of Philips Consumer Electronics Company.

reception problems caused by signal conditions or cable or antenna
systems outside the unit.

a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.

incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or
consequential damages, so the above exclusion may not apply to
you.  This includes, but is not limited to, prerecorded material,
whether copyrighted or not copyrighted.)

•  a product used for commercial or institutional purposes.

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where the product is
officially distributed by Philips Consumer Electronics Company.  In
countries where Philips Consumer Electronics Company does not
distribute the product, the local Philips service organization will
attempt to provide service (although there may be a delay if the
appropriate spare parts and technical manual(s) are not readily
available).

MAKE SURE YOU KEEP...

Please keep your sales receipt or other document showing proof of
purchase.  Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.

BEFORE REQUESTING SERVICE...

Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.

TO GET WARRANTY SERVICE IN U.S.A., 
PUERTO RICO OR U.S. VIRGIN ISLANDS...

Contact a Philips factory service center (see enclosed list) or
authorized service center to arrange repair.

(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a
particular purpose, are limited in duration to the duration of this
express warranty.  But, because some states do not allow limitations
on how long an implied warranty may last, this limitation may not apply
to you.)

FOR WARRANTY COVERAGE IN CANADA...

Note: Product Warranty coverage may vary between countries where
product is distributed by Philips Consumer Electronics Company. In
order to receive full and specific warranty details for products sold and
serviced in Canada, please contact Philips at:

1-800-661-6162

(from Canada - French Speaking)

1-800-531-0039

(English and Spanish Speaking)

REMEMBER...

Please record the model and serial numbers found on the product
below.  Also, please fill out and mail your warranty registration card
promptly.  It will be easier for us to notify you if necessary.

MODEL # ________________________________________________

SERIAL #

________________________________________________

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Philips Consumer Electronics Company,  P.O. Box 520890,  Miami, FL 33152,  (402) 536-4171

126 1023.2 en us  29-08-2002  15:05  Pagina 17

Summary of Contents for 50FD9934





















Reviews: