Network frequency
With the
Network frequency mode
set to
Manual
,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Network ID
Enter the network ID supplied by your cable
provider.
Symbol rate mode
If your cable provider did not give you a
specific
symbol rate
value to install the TV channels,
leave the
Symbol rate mode
setting on
Automatic
.
If you received a specific symbol rate value,
select
Manual
.
Symbol rate
With the
Symbol rate mode
set to
Manual
, you can
enter the symbol rate value by using the number
keys.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select
Free +
scrambled
. If you did not subscribe to pay TV
channels or services, you can select
Free
channels only
.
Automatically Search for Channels
(Home)
>
Settings
>
Antenna/cable
installlation
> Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
Channel Update Message
(Home)
>
Settings
>
Antenna/cable
installlation
>
Channel update message
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
Digital: Reception Test
(Home)
>
Settings
>
Antenna/cable
installlation
>
Digital: reception test
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with
and
and change the number
with
and
. To check the frequency,
select
Search
and press
OK
.
Analogue: Manual Installation
(Home)
>
Settings
>
Antenna/cable
installlation
>
Analogue: manual installation
Analogue TV channels can be manually installed,
channel by channel.
•
System
To set up the TV system, select
System
.
Select your country or the part of the world where
you are now and press
OK
.
•
Search Channel
To find a channel, select
Search Channel
and
press
OK
. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press
OK
, select
Search
and press
OK
to search
for a channel automatically. The found channel is
shown on screen and if the reception is poor,
press
Search
again. If you want to store the channel,
select
Done
and press
OK
.
•
Fine tune
To fine tune a channel, select
Fine tune
and
press
OK
. You can fine tune the channel
with
or
.
If you want to store the channel found,
select
Done
and press
OK
.
•
Store
You can store the channel on the current channel
number or as a new channel number.
Select
Store
and press
OK
. The new channel
number is shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
18
