Automatic Channel Update
If you receive digital channels, you can set the TV to
automatically update these channels.
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the Channels List and are marked with a
.
Channels without a signal are removed. The TV must
be in standby to automatically update channels. You
can switch off Auromatic Channel Update.
To switch off the automatic update…
1 -
Press
/
/
Home >
Settings > Install
channels and press
OK
.
2 -
Select
RF Channel Installation
and press
OK
.
3 -
Enter your PIN code if necessary.
4 -
Select
Automatic Channel Update
and
press
OK
5 -
Select
Off
and press
OK
.
6 -
Press
(left) to go back one step or
press
BACK to close the menu.
Channel Update Message
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
To switch off the message…
1 -
Press
/
/
Home >
Settings > Install
channels and press
OK
.
2 -
Select
RF Channel Installation
and press
OK
.
3 -
Enter your PIN code if necessary.
4 -
Select
Automatic Channel Update
and
press
OK
5 -
Select
Off
and press
OK
.
6 -
Press
(left) to go back one step or
press
BACK to close the menu.
In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
TV is in standby.
Digital: Manual Installation
Digital TV channels can be manually installed,
channel by channel.
To install digital channels manually…
1 -
Press
/
/
Home >
Settings > Install
channels and press
OK
.
2 -
Select
RF Channel Installation
and press
OK
.
3 -
Select
Digital: Manual Installation
and
press
OK
.
4 -
Select
Search
and press
OK
. You can enter a
frequency yourself to find a channel or let the TV
search for a channel. Press
(right) to
select
Search
and press
OK
to search for a channel
automatically. The found channel is shown on screen
and if the reception is poor, press
Search
again. If
you want to store the channel, select
Done
and
press
OK
.
Analogue: Manual Installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually…
1 -
Press
/
/
Home >
Settings > Install
channels and press
OK
.
2 -
Select
RF Channel Installation
and press
OK
.
3 -
Select
Analogue: Manual Installation
and
press
OK
.
•
System
To set up the TV system, select
System
.
Select your country or the part of the world where
you are now and press
OK
.
•
Search Channel
To find a channel, select
Search Channel
and
press
OK
. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press
(right) to select
Search
and press
OK
to
search for a channel automatically. The found
channel is shown on screen and if the reception is
poor, press
Search
again. If you want to store the
channel, select
Done
and press
OK
.
•
Store
You can store the channel on the current channel
number or as a new channel number.
Select
Store Current Channel
or
Store as New
Channel
and press
OK
. The new channel number is
shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
11.7
Internet
Start Internet
You can browse the Internet on your TV. You can
view any Internet website but most of them are not
prepared for a TV screen.
• Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
• You cannot send or download files.
• Internet pages are shown one page at a time and
full screen.
32
