Philips 42PJ250R-ZA, Owner'S Manual

Page: 21 / 112

3
EXTERNAL
EQ
UIPMENT
SETUP
G G
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI version 1.3,
flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
G G
HDMI mode supports PCM audio format only.
G G
Audio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
G G
We recommend using under 10m of the HDMI cable. When using over the length, connect a amplifier or
repeater.
G G
If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
NOTE !
CONNECTING WITH AN HDMI CABLE
Connect the HDMI output of the external equipment
(digital set-top box, DVD, etc.) to H
HD DM MII//D DV VII IIN N 1 1
or H HD DM MII IIN N 2 2(Except 42/50PJ2***, 50PK2***) jack
on the TV.
Turn on the external equipment.
(Refer to the external equipment's manual for operating
instructions.)
Selec
t H H D D M M II 1 1 or H H D D M M II 2 2 (Except 42/50PJ2***,
50PK2***) input source using the II N N P P U U T T button on
the remote control.
2
3
1
HDMI-DTV OUTPUT
/DVI IN 1
RS-232C IN
(CONTROL&SERVICE)
RGB IN (PC)
1