Philips 42PFL5556/V7, User Manual

Page: 16 / 34

14 EN
4
Enter your code using the
Numeric
buttons .
»
Follow the on-screen instructions to
create or change your PIN code.
Tip
•
If you forget your code, enter ‘8888’ to
override any existing codes.
Lock or unlock one or more channels
1
Press >
[Setup]
>
[Channel settings]
>
[Child lock]
>
[Channel lock]
.
» A list of channels is displayed.
2
Select the channel that you want to lock
or unlock, then press
OK
.
»
The first time you lock or unlock a
channel, you are prompted to enter
your PIN code.
3
Enter your code and press OK .
»
If the channel is locked, a lock icon is
displayed.
4
Repeat the process to lock or unlock
more channels.
Note
•
When you switch channels with
CH - or CH
+,
the locked channels are skipped.
•
When you access the locked channels from the
channel grid, you are prompted to enter your
PIN code.
View Scenea
You can display a default picture as the
wallpaper on your TV. You can also load another
picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed
for 240 minutes. Otherwise, it is displayed for
the duration of the sleeptimer.
Use timers
You can set sleep timers to switch the TV to
standby at a specified time.
Tip
•
Set the TV clock before you use timers.
Automatically switch the TV to
standby(sleep timer)
Sleep timer switches the TV to standby after a
pre-defined duration.
Tip
•
You can switch off your TV earlier or reset the
sleep timer during the countdown.
1
Press .
2
Select
[Setup]
>
[TV settings]
>
[Preferences]
>
[Sleep timer]
.
» The
[Sleep timer]
menu appears.
3
Select a value between zero and 180
minutes.
»
If you select zero, the sleep timer
switches off.
4
Press OK to switch on the sleep timer.
»
The TV switches to standby after the
specified time.
Lock unsuitable content
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change code
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Child lock].
3
Select [Set code] or [Change code] .
»
The [Set code] / [Change code]
menu appears.