Mechanical Instructions
4.
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal( for 32"/48" 5500
series & 42"/47" 6100/6500 series)
Instructions below apply to the 42PFH6109/88, but will be
similar for other 32"/48" 5500 series & 42"/47" 6100/6500
series models.
4.3.1
Rear Cover
Refer to
for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1.
Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Then remove the fixation
screws [2], [3] that secure the rear cover. Refer to
2.
Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-20 Rear cover removal
4.3.2
Keyboard Control Unit
Refer to
for details.
1.
Release the connector [2] from the keyboard control panel.
Caution: be careful, as these are very fragile connectors!
2.
Remove all the fixation screws from the keyboard control
panel [1].
When defective, replace the whole unit.
19600_102.eps
1
M4 × 10
Q3 × 8
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
M3 × 4
3
3
