Philips 42PFH5209, User Manual

Page: 25 / 67

8
Sources
8.1
Sources list
In the list of connections - the Source menu - you can find the
devices connected to the TV.From this Source menu, you can
switch to a device.
Sources menu
To open the Sources menu, press  SOURCES .
To switch to a connected device, select the device with the
arrows
 (left) or  (right) and press OK .
To close the Source menu without switching to a device, press
 SOURCES again.
8.2
From standby
With the TV in standby, you can switch on a connected device
with your TV remote control.
Play
To switch on both disc player and TV from standby and start
playing the disc or programme immediately, press
 (play) on
the TV remote control.
The device should be connected with an HDMI cable and both
TV and device must have HDMI CEC switched on.
Home Theatre System
You can switch on your Home Theatre System to listen to an
audio disc or a radio channel and leave the TV in standby.
To only switch on the HTS, with the TV in standby, press

SOURCES on the TV remote control.
8.3
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC to communicate with
the connected devices. Devices must support HDMI CEC and
must be connected with an HDMI connection.
25