Philips 42PFG5909, User Manual

Page: 55 / 76

Configure bulb
In the following step, you will configure each Philips hue bulb .
To configure each hue bulb…
1 - Select the bulb name in the Configure Amhue menu
and press OK . The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
Angle
will send the correct Ambilight color
to the bulb. Press  (up) or  (down) to adjust.
3 - Press  (right) to set the distance.
4 - Secondly, indicate the Distance between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
color. Press
 (up) or  (down) to adjust.
5 - Press  (right) to set the brightness.
6 - Finally, set the Brightness of the bulb. Press  (up) or 
(down) to adjust.
7 - To stop configuring this bulb, select OK and press OK .
8 - In the Configure Amhue menu, you can select every
bulb and do the same.
9 - When all Amhue bulbs are configured, select
Finish
and press OK .
Amhue is ready for use.
You can always change the Amhue configuration later.
To change the configuration, press

and select
Setup
>
TV
settings > Ambilight > Amhue .
Immersion
With Immersion , you can adjust the level of the Ambilight effect
for the Amhue bulbs.
To adjust the Amhue Immersion…
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Amhue >
Immersion and press OK .
3 - Press

(up) or

(down) to adjust.
4 - Press  , repeatedly if necessary, to close the menu.
.
Info
In View configuration , see the current Amhue
configuration, such as which network you are using and how
many bulbs are connected.
To view the current Amhue setup…
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Amhue > View
configuration and press OK .
3 - Select the item you want to view and press OK .
4 - Press , repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall color
With
Wall color
, you can neutralize the influence of a colored
wall on the Ambilight colors. Select the color of the wall behind
the TV and the TV will modify the Ambilight colors to appear as
they are intended.
To select the color of the wall .
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Advanced > Wall color .
3 - Select the color sample that matches the color of the wall
behind the TV and press
OK
.
4 - Press  , repeatedly if necessary, to close the menu.
TV turn off
With TV turn off , you can set Ambilight to turn off immediately
or slowly fade out when you turn off the TV. The slow fade out
gives you some time to turn on the lights in your living room.
To select the TV turn off . . .
1 - Press  and select Setup and press OK .
2 - Select TV settings > Ambilight > Advanced > TV turn off .
3 - Select Fade out to off or Immediate turn off .
4 - Press  , repeatedly if necessary, to close the menu.
Lounge light mood
When the TV is on standby, you can turn Ambilight on and
create a Lounge light effect in your room.
You can also set up the color range in the TV settings menu.
1 - Turn on the TV (out of Lounge light mode).
2 - Press  and select Setup and press OK .
3 - Select TV settings > Ambilight > Advanced > Loungelight
mood and press OK .
4 - Select the color range you prefer.
5 - Press  , repeatedly if necessary, to close the menu.
MyRemote Loungelight
With MyRemote Loungelight , you can set the Ambilight color
with your smartphone or tablet via the Philips TV Remote App .
You need to install the Philips TV Remote App on your
smartphone or tablet before using this App to set the color.
Also, your TV, smartphone, or other mobile devices must be
linked with your home network to use the
Philips TV Remote
App .
1 - Press

and select Setup and press OK .
2 - Select TV settings > Ambilight > Advanced > Loungelight
mood > MyRemote Loungelight .
If the TV is connected to your mobile device with the Philips TV
55