9
Use of the remote control
Operation
Use of the remote control
VCR 1
VCR 2
DVD
AMP
TUNER
TAPE
SAT
CD
TV
π
π
π
π
OK
M
u
TV
q
X
B
1
2
3
4
5
6
7
9
PICTURE
SOUND
+
-
V
P
+
-
¬
0
i
b
j
8
0
SMART CONTROLS
b
w
Select your computer or other
peripherals
Press this key repeatedly to select
EXT1
,
EXT2, EXT3
,
FRONT, VGA
or
TV channels
,
according to where you connected your
peripherals (see p. 24).
Remark: in
VGA
mode only some keys are valid.
See
VGA
menu, p. 24.
Menus and on screen information will disappear
if you select
VGA
.
M
Mode selection
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV
TV operation
Press this key to use the remote control
directly in the TV mode
B
Standby
The set is switched off and the red indicator
lights up in front of receiver box and the
screen.
To switch the TV on again press the
B
key
or press - P + or the digit keys.
Although this set is provided with low power
standby it is still advised to switch off your TV
overnight instead of leaving it on standby.You
save energy.
b
Dual screen
see p. 16
q
Picture format
Press this key repeatedly to select another
picture format: 4:3, Movie Expand 14:9,
Movie Expand 16:9 with or without subtitling,
Super Wide,Wide Screen or Auto Format
(when Auto Format is set to Yes in the
SETUP
menu).
Auto Format makes the picture to fill the
screen as much as possible.
Sometimes also video recorder programmes
carry special signals which will automatically
switch the TV to the correct screen format.
Note: In VGA mode press the
q
key to switch
between a 4:3 or a 16:9 picture format.
In Dual screen mode press the
q
key to switch
between a full or a squeezed picture format.
X
Bilingual choice and
sound mode selection
Press this key
• to switch from
Stereo
to
Mono
sound, in
case of stereo transmission, or from
Digital Sound
to
Digital Sound available
,
in case of digital transmission;
• to choose between language
Y
(Dual
Y
) or
language
Z
(Dual
Z
), in case of bilingual
transmission.The setting is separately
stored for each TV channel.
0/9
Digit keys
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
0
Previous programme
The previously selected TV channel is displayed.
The
◊
keys are only used with some video
recorders and DVDs.
i
Permanent programme number
Screen information
Press for 5 seconds to activate/de-activate the
continuous display of the programme number.
Press briefly to display information about the
selected TV channel and programme, the sound
mode, picture format settings, the selected
DNR setting and the remaining time set with
the sleeptimer.
Use of the remote control
V
Volume
Press + or - to adjust the volume.The
volume is adjusted. If you want to store the
volume adjustment in the memory, see the
Features menu, General PP store, p. 14 to
store the same volume adjustment for all
the stored TV channels
P
Programme selection
To browse through the TV channels
activated in the Favourite Programme menu.
¬
Sound mute
Temporarily interrupt the sound or restore
it.
