
7
Connect Peripheral Equipment
You may connect 3 possible VGA sources (
VGA1
,
VGA2
or
DVI-D
) and
3 possible video sources (
AV1
,
AV2
and
AV3
) to the monitor.
The following diagrams show you where you can connect your peripheral
equipment.
Note: in case the monitor is operating in combination with an electronic receiver box,
the AV inputs on the monitor will be disabled and the VGA2 connector becomes an
output.
Equipment with Y/C-SVHS output connectors
&
Connect the video cable to the
AV2
connector.
é
Connect the audio cables to the equipment’s
AUDIO L
and
R
sockets and to
the
AUDIO L
and
AUDIO R AV2
sockets on the monitor.
Equipment with CVBS output connectors
&
Connect the video cable to the
AV1
connector.
é
Connect the audio cables to the equipment’s
AUDIO L
and
R
sockets and to
the
AUDIO L
and
R AV1
sockets on the monitor.
Equipment with Component Video Output connectors
Note: AV3 can handle the following video signals:YCbCr, HD-YPbPr and HD-RGB.
The discrimination between the various input formats and the appropriate video
processing is done automatically. It is however possible to overrule the automatic
detection. See Setup menu, p. 6.
&
Connect the video cables of your equipment with YPbPr output with
composite sync on Y, or of your equipment with YCbCr output with
composite sync on Y to the YPbPr, resp.YCbCr input
AV3 IN
sockets of the
monitor.
é
Connect the video cables of your equipment with RGB output with separate
Horizontal and Vertical sync to the RGB input sockets and to the H and V
sockets
AV3
of the monitor.
“
Connect the audio cables to the equipment’s
AUDIO L
and
R
sockets and to
the
AUDIO IN L
and
AUDIO IN R AV3
sockets on the monitor.
Note: when High Definition signals are inputted to the monitor via the YCbCr/RGB
input, the monitor switches to the HD Video Mode.
The following HD and ED video modes are supported by the monitor on the YCbCr,
RGB and VGA2 HD input:
1920x1080/60I
720x480/60P
1280x720/60P
720x576/50P
The following SD video modes are supported by the monitor on theYPbPr input:
720x480/60I
720x576/50I
Note: you should make the correct selection for AV3 in the Setup menu, p. 6.
MAINS INLET
RS232
L
R
L
R
L
R
VGA 1
VGA 1
VGA 2
DVI-D
VGA 2
DVI-D
RC OUT
L
Y/C
AV 2
L
CVBS
Pb
H
Y
Pr
V
L
R
R
R
~ MAINS
RS232
DVI-D
Y/C S-VHS
L
R
L
R
AUDIO IN
AUDIO IN
G/Y/Y
CVBS
B/Pb/Cb
R/Pr/Cr
V
H
AUDIO IN
R
VGA 1
VGA 2
RC-OUT
AV2
AV1
AV3
L
AUDIO
VGA 1
VGA 2
DVI-D
AV2
~ MAINS
RS232
DVI-D
Y/C S-VHS
L
R
L
R
AUDIO IN
AUDIO IN
G/Y/Y
CVBS
B/Pb/Cb
R/Pr/Cr
V
H
AUDIO IN
R
VGA 1
VGA 2
RC-OUT
AV2
AV1
AV3
L
AUDIO
VGA 1
VGA 2
DVI-D
AV1
~ MAINS
RS232
DVI-D
Y/C S-VHS
L
R
L
R
AUDIO IN
AUDIO IN
G/Y/Y
CVBS
B/Pb/Cb
R/Pr/Cr
V
H
AUDIO IN
R
VGA 1
VGA 2
RC-OUT
AV2
AV1
AV3
L
AUDIO
VGA 1
VGA 2
DVI-D
AV3
1015.5 en 12-11-2003 11:12 Pagina 7