manualshive.com logo in svg

Philips 42FD9953/17S, User Manual

Share
Download
Philips 42FD9953/17S User Manual Download Page 14

8

Use of the menus

Sound menu

Volume

This control allows you to adjust the volume level of the sound from the
speakers.

Bass

Bass attenuates or amplifies the low-frequency response of the sound from
the loudspeakers.

Treble

Treble attenuates or amplifies the high-frequency response of the sound
from the loudspeakers.

Sound mode

This control allows you to switch between mono and stereo sound.

Note: Bass, Treble and Sound mode will not be available in VGA loop through mode,
i.e. when a receiver box is connected to the monitor and a VGA source is selected.

Setup menu

Language

&

Use the cursor down to select 

Language

.

é

Press the cursor right to enter the list of selectable languages.

“

Use the cursor up/down to scroll through the list and to bring up other
languages which are not displayed on the screen at present.

Note: Only with the US English language, the menu items will be displayed with 

additional icons.

Power savings  

This control allows you to overrule the automatic power savings feature.
In case

Power savings

is switched 

Off

, the power always remains on until the

monitor is forced to standby.

&

Use the cursor down to select 

Power savings

.

é

Press the cursor left/right to select 

On

or 

Off

.

AV3

This control allows you to set the AV3 input to HD-RGB,YCbCr or HD-
YPbPr.When having selected 

Auto

, the monitor makes the selection

automatically between YCbCr, HD-YPbPr or HD-RGB.
See also p. 9, Equipment with Component Video Output connectors.

&

Use the cursor down to select 

AV3

.

é

Press the cursor right to enter the list with options.

“

Press the cursor up/down to select one of the options.

VGA2

This control allows you to select whether to set the VGA2 connector as
input, output or even HD-input.

&

Use the cursor down to select 

VGA2

.

é

Press the cursor right to enter the list with options:

VGA IN

,

VGA OUT

or

HD IN

.

“

Press the cursor up/down to select one of the options.

Note: AV3 and VGA2 will not be available in VGA loop through mode, i.e. when a
receiver box is connected to the monitor and a VGA source is selected.

Volume 

V

Bass 

-

Treble 

+

Sound mode 

J

Sound  

M

Language 

‡

US English

Power savings

) 

English

AV3  

(

Nederlands

VGA2  

§

Deutsch

Français

Español

Setup  

º

Summary of Contents for 42FD9953/17S





















Reviews:

No comments

Brands by name

Popular brands

Load more brands