Display User Manual
3D Solutions
22 March 2006
10 of 20
©2005 Philips Electronics Nederland B.V.
o
Consult a service technician if the display does not operate normally when you have
followed the instructions in this manual.
o
Only qualified service personnel should open the casing cover.
o
Keep the display out of direct sunlight and away from stoves or any other heat source.
o
Remove any object that could fall into the vents or prevent proper cooling of the
display’s electronics.
o
Do not block the ventilation holes on the cabinet.
o
Keep the display dry. To avoid electric shock, do not expose it to rain or excessive
moisture.
o
If turning off the display by detaching power cable, wait for 6 seconds before attaching
the power cable or DC power cord for normal operation.
o
When positioning the display, make sure the power plug and outlet are easily
accessible.
o
When using the wall mounting bracket, always secure it tightly to the display with 2
screws.
o
IMPORTANT: Always display alternating content with your application. If a still image in
high contrast remains on the screen for an extended period of time, it may leave an
'after-image' or 'ghost image' on the front of the screen. This is a well-known
phenomenon that is caused by the shortcomings inherent in the LCD technology. Be
aware that the after-image symptom cannot be repaired and is not covered under
warranty.
3.3
3.3
3.3
3.3 Installation locations
Installation locations
Installation locations
Installation locations
o
Avoid exposure to heat and extreme cold.
o
Do not store or use the product in locations exposed to heat, direct sunlight or extreme
cold.
o
Avoid moving the product between locations with large temperature differences.
Choose a site that falls within the following temperature and humidity ranges.
•
Temperature: 0-35°C
•
Humidity: 20-80% RH
o
Do not subject the product to severe vibration or high impact conditions. Do not place
the product inside a car or boot.
Summary of Contents for 42-3DC601/00
Page 4: ......
