Philips 40PFT4111, User Manual

Page: 40 / 56

4. Press

, repeatedly if necessary, to close the
menu.
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Sleep
timer .
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press

, repeatedly if necessary, to close the
menu.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch off timer …
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Switch
off timer .
3. Select inside the slider bar to adjust the value. The
value
0 (Off) deactivates the automatic switch off.
4. Press

, repeatedly if necessary, to close the
menu.
Location
To set the TV for Home use…
1. Press

and select Setup and press OK .
2. Select TV settings > General
settings > Location and press OK .
3. Select Home and press OK .
4. Press

, repeatedly if necessary, to close the
menu.
TV placement
As part of the first installation, this setting is set to
either
On a TV stand or On the Wall . If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > TV
Placement and press OK .
3. Select On a TV stand or On the Wall .
4. Press

, repeatedly if necessary, to close the
menu.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings…
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Factory
Settings and press OK .
3. Press

, repeatedly if necessary, to close the
menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Reinstall
TV and press OK .
3. Follow the instructions on screen. The installation
may take a few minutes.
40