EN 53
En
gl
is
h
(
Previous
) / (
Next
): Searches
backwards and forwards on the
connected device.
Numeric buttons
: When EasyLink is
enabled, selects a title, chapter or track.
(
Options
): Displays the menu of the
connected device. When is pressed,
the TV menu is displayed.
(
Standby
): Press to enable one-touch
standby. This switches the TV and the
connected device to standby.
Other EasyLink buttons are available via
On-Screen Remote Control (OSRC).
To access the OSRC
1. While watching a connected device, press
.
2. Select
[Show remote control]
, then press
OK
.
3. Use the
Navigation buttons
and
OK
to
select and use an on-screen button.
4. Press to exit.
Configure TV speakers
NonPu blish
You usually connect the TV to a HDMI-CEC
compliant device such as a HTS using both a
HDMI cable for video and a digital audio
cable for audio. You can output TV audio
through the HDMI cable solely, provided
both the TV and device are HDMI ARC
compliant (see
Connect the TV > Use
Philips EasyLink > Use HDMI ARC
(Page
53
)).
Configure TV speakers
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[EasyLink]
>
[TV speakers]
.
3. Select one of the following options, then
press
OK
:
[Off]
: Turn off TV speakers.
[On]
: Turn on TV speakers.
[EasyLink]
: TV audio continues to be
streamed through the TV speakers.
Switch the TV audio to the connected
HDMI-CEC audio device through the
experience menu.
[EasyLink autostart]
: Turn off TV
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Switch TV audio in experience menu
If
[EasyLink]
or
[EasyLink autostart]
are
selected, access the experience menu to
switch the TV audio.
1. While watching TV, press
.
2. Select
[Speakers]
, then press
OK
.
3. Select one of the following, then press
OK
:
[TV]
: On by default. Streams TV audio
through TV speakers until the
connected HDMI-CEC audio device
switches to system audio control.
Thereafter, TV audio is streamed
through the connected device.
[Amplifier]
: Streams audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio will continue to stream
from TV speakers if
[EasyLink]
was
selected. If
[EasyLink autostart]
was
enabled, the TV prompts the
connected device to switch to system
audio mode.
