English
16
4 Use your TV
Switching on your TV and putting it in
Standby mode
To Turn the TV On from Standby or Off to Standby
• Press
.
on the side panel or the Remote Control.
Note(s)
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low Standby power
consumption.
Adjusting Volume
To decrease or increase Volume
• Press
VOL + / −
on the Remote Control or
VOL ◄/►
on the side
panel.
VOL ◄ (–)
: Volume Down
VOL ► (+)
: Volume Up
To mute or unmute sound
• Press
(MUTE)
on the Remote Control to mute the sound.
• Press
(MUTE)
again or
VOL + / −
to recover the original sound.
Switching Channels
To select Channels by using CH +/− or CH ▲/▼
• Press
CH ▲/▼
on the side panel or press
CH +/−
on the Remote
Control.
To select Channels by using the NUMBER buttons
–When selecting the channel 123
Press
(PREV.CH)
to return to the previously viewed channel.
To change broadcast signals
• Press
DTV / ATV
on the Remote Control while watching a
program.
Note(s)
• To select the non-memorized channels, use
the NUMBER buttons
.
•
Channel not available
or
No Signal
will appear on the TV screen after the subchannel
broadcast is over.
•
Audio only
message will appear on the TV screen, when you receive only sound signal.
Continued on next page.
