Philips 40PFL3606D, User Manual, Page: 32 / 47

29
EN
•
DVI-HDMI cable
•
HDMI cable and HDMI-DVI adaptor
• VGA cable
DVI
AUDIO IN
LEFT/RIGHT
VGA/DVI
DVI
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA
VG
A
AUDIO IN
LEFT/RIGHT
VGA/DVI
Use Philips EasyLink
Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control features.
If your HDMI-CEC compliant devices are
connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
• Connect at least two HDMI-CEC
compliant devices through HDMI
• Configure each HDMI-CEC compliant
device properly
• Switch on EasyLink
Note
•
The EasyLink-compliant device must be switched on
and selected as the source.
•
Philips does not guarantee 100% interoperability with
all HDMI CEC devices.
Switch on or off EasyLink
When you play a HDMI-CEC compliant device,
the TV switches on from standby, and switches
to the correct source.
Note
•
If you do not intend to use Philips EasyLink, switch it off.
1
Press .
2
Select
[Setup]
>
[TV settings]
>
[EasyLink]
>
[EasyLink]
.
3
Select
[On]
or
[Off]
, then press
OK
.
Use one-touch play
1
After you switch on EasyLink, press play on
your device.
» The TV automatically switches to the
correct source.
Downloaded From TV-Manual.com Manuals