control digit keys. Alternatively, select the frequency, position the
arrows on a number with
and
and change the number with
and
. To check the frequency, select
Search
and press
OK
.
If you use DVB-C to receive channels, the option
Symbol rate
mode is
available. For Symbol rate mode, select
Automatic
,
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 -
Press
and select
Setup
and press
OK
.
2 -
Select
Channel settings
>
Channel installation
>
Analogue :
Manual installation
and press
OK
.
•
System
To set up the TV system, select
System
and press
OK
.
Select your country or the part of the world where you are
now.
•
Search channel
To find a channel, select Search channel and press
OK
. Select
Search
and press
OK
. You can also enter a frequency yourself. If
the reception is poor, press
Search
again. If you want to store
the channel, select
Done
and press
OK
.
•
Fine tune
To fine tune a channel, select
Fine tune
and press
OK
. You can
fine tune the channel with
or
.
If you want to store the channel found, select
Done
and press
OK
.
•
Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select
Store current channel
or
Store as new channel
.
You can redo these steps until you have found all available
analogue TV channels.
34
