Mechanical Instructions
4.
Figure 4-10 Speakers removal
4.3.3
Small Signal Board (SSB) + PSU combination panel
Refer to
for details.
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB + PSU combination panel.
1.
Release the clips from the LVDS connector that connect
with the SSB + PSU combination panel [1].
Caution: be careful, as these are very fragile connectors!
2.
Unplug all other connectors [2] , [3].
3.
Remove all the fixation screws from the SSB + PSU
combination panel [4].
4.
The SSB + PSU combination panel can now be shifted
from side connector cover, then lifted and taken out of the
I/O bracket. Refer to
for details.
Figure 4-11 SSB + PSU combination panel removal
4.3.4
Stand bracket
1.
Remove all fixation screws of the bracket.
2.
Lift the bracket from the set.
4.3.5
Control Board IR/LED Panel
1.
Remove the stand bracket, as described earlier.
19530_110_130723.eps
130723
1
1
1
1
3
2
3
19530_112_130723.eps
130723
2
3
1
4
4
4
4
