background image

Congratulations

on your

purchase,

and welcome to the 

“family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available
today.And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive
warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome–and thanks for investing in a PHILIPS product.
Sincerely,

Robert Minkhorst
President and Chief Executive Officer

Know these

safety

symbols

This “bolt of lightning” indicates uninsulated material within your unit which may cause an electrical

shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which you should read the enclosed
literature closely to prevent operating and maintenance problems.

WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.

CAUTION:To prevent electric shock, match wide blade of plug to wide slot, and fully insert.

ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

P.S. Remember, to get the most from your PHILIPS  product,

you must return your Warranty Registration Card
within 10 days. So please mail it to us right now!

2

INTERNET ADDRESS: http://www.philipsusa.com

Once your PHILIPS  purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS  product.

So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of

these important benefits.

Return your Warranty Registration card today to ensure you receive all

the benefits you’re entitled to.

Warranty

Verification

Registering your product within
10 days confirms your right to
maximum protection under the
terms and conditions of your PHILIPS
warranty.

Owner

Confirmation

Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.

Model

Registration

Returning your Warranty Registration
Card right away guarantees you’ll
receive all the information and special
offers which you qualify for as the
owner of your model.

R

E

G

I S

T

R A

T I O N

N

E

E

D

E

D

W

IT

HI

N

10

D

A

Y

S

Hurry!

2080.2 am    28-05-2001  10:31  Pagina 1

Summary of Contents for 34PW9817















































Reviews: