
3
TPS1.1A LA
1. Technical Specifications,Connections,and Chassis Overview
PIN
No.
SINGAL
PIN
No.
SINGAL
1 T.M.D.S. Data2-
13 No connect
2 T.M.D.S. Data2+
14 +5V Power
3 T.M.D.S. Data2/4 Shield
15 Ground (for +5V)
4 No connect
16 Hot Plug Detect
5 No connect
17 T.M.D.S. Data0-
6 DDC Clock
18 T.M.D.S. Data0+
7 DDC Data
19 T.M.D.S. Data0/5 Shield
8 No connect
20 No connect
9 T.M.D.S. Data1-
21 No connect
10 T.M.D.S. Data1+
22 T.M.D.S. Clock Shield
11 T.M.D.S. Data1/3 Shield
23 T.M.D.S. Clock+
12 No connect
24 T.M.D.S. Clock-
1.3 Chassis Overview
DVI Pin assignment
D-sub Pin assignment
PIN
No.
SINGNAL
PIN
No.
SINGNAL
1
Red video input
9
DDC +5V
2
Green video input /SOG
10
Logic ground
3
Blue video input
11
GND
4
GND
12
Serial data line (SDA)
5
GND– cable detect
13
H. Sync / H+V
6
Red video ground
14
V. Sync
7
Green video ground
15
Data clock line (SCL)
8
Blue video ground
S-Video with S terminal (Video, Audio input) Specification
Video - Y : 1Vpp , C : 300 mV pp
-Impedance : 75
W
.
Audio L/R input (share with Composite Audio input)
Nominal
: 0.5 V rms.
Maximum : 1.5 V rms. Impedance > 10 k
W
.
Note : the input will be overloaded when the signal > 1.5 V rms.
Support : PAL, NTSC and SECAM colour system
Composite with S terminal (Video, Audio input) Specification
Video - : 700mV Video, 300 mV -Sync
Impedance : 75
W
.
Audio L/R input (share with Composite Audio input)
- Nominal
: 0.5 V rms.
Maximum : 1.5 V rms, Impedance > 10 k
W
.
Note : the input will be overloaded when the signal > 1.5 V rms.
Support : PAL, NTSC and SECAM colour system
DVI input with DVI connector, support HDCP Specification
Video - Digital interface with 4 channels TMDS signal
Impedance : 100
W
.
Audio L/R input
- Nominal
: 0.5 V rms.
Maximum : 1.5 V rms.-Impedance > 10 K
Support : 480i/p, 720p/60Hz, 1080i/60Hz
Key board
Power board
P
K
S
Scaler board
IR board
SideAV board
IR
AV
AV
http://jdwxzlw.5d6d.com/?fromuser=森林
家电维修资料网
免费下载各种维修资料